Performance
Efficient Air Distribution – Provides a dedicated radial ducting solution for distributing supply and extract air throughout MVHR and ventilation systems.
Flexible Installation – Semi-rigid construction allows the ducting to be routed around obstacles while maintaining the shape of the installed duct run.
50 Metre Roll – Supplied in a 50 metre roll, allowing duct lengths to be cut to suit individual installation requirements.
90mm Compatibility – Designed for use with ResiAIR™ 90mm radial ventilation components and connection accessories.
Anti-Static Internal Lining – Helps reduce dust build-up within the ductwork for cleaner internal surfaces.
Anti-Bacterial Construction – Helps promote cleaner air distribution through the ventilation system.
Reduced Connections – Supplied in a continuous roll to help minimise unnecessary joints and simplify installation.
Installation
Measure and cut the required length of 90mm semi-rigid ducting to suit the ventilation system layout.
Route the ducting between the manifold and the relevant ventilation component, avoiding unnecessary bends and restrictions.
Fit an O-ring seal to the end of the duct before connecting to a manifold, connector, grille housing or other compatible accessory.
Push the duct fully into the connection and secure using the appropriate click ring.
Use pipe connectors or 90° bends where required to achieve the desired duct route.
Seal any unused connections using suitable ResiAIR™ end caps or blanking caps.
Check all duct runs and connections are fully secured and sealed before operating and commissioning the ventilation system.